It is currently Sat Dec 16, 2017 12:47 pm




Post Reply  Page 1 of 1 [ 2 posts ] 
Author Message
PostPosted: Wed Jan 20, 2016 2:25 pm 

Joined: Tue Sep 01, 2015 8:31 pm
Posts: 24
Location: Paris, France
Hi all,
I am interested how RF(MCU)-to-Linux connection can be implemented for the DASH-7 network.

Do we use SLIP (https://tools.ietf.org/html/rfc1055) and if not how do we transfer packets from the border router to Linux system that transfers them further to the Internet (I am having in mind some topology similar to this: http://processors.wiki.ti.com/index.php ... LOWPAN-BBB).

BR,
Drasko


Offline
 Profile  
 
PostPosted: Thu Jan 21, 2016 12:32 am 
Site Admin

Joined: Tue Jun 12, 2012 4:33 am
Posts: 25
Location: New York, NY
Haystack maintains a PPP networking element for edge-routing/gateway communication, although it isn't open source at this time. SLIP is simpler than PPP, so it's an easy port.

There are two important points here:
1. it's not so hard to bridge PPP into OpenTag. You can strip-down ┬ÁIP and do it, that's in fact what we did.
2. Haystack eventually release it's code to open source. Expect it by mid or late 2016 for sure.


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post Reply  Page 1 of 1 [ 2 posts ] 

It is currently Sat Dec 16, 2017 12:47 pm


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

cron