It is currently Sat May 25, 2019 5:44 am

Post Reply  Page 1 of 1 [ 2 posts ] 
Author Message
PostPosted: Tue Dec 01, 2015 2:24 am 

Joined: Tue Dec 01, 2015 12:41 am
Posts: 1

I am very new to OpenTag, so when the wiki cannot solve my problem I come here for help.

I am using CCS v5.5 on Win7 and I ran CCS as an administrator user.

I downloaded the Master branch code from Git, and imported the examples from /app (for example demo_palfi). I set up virtual drive B:/ as mentioned in the wiki and that should be all I need to do set up the project.

However, when I tried to build the project, there are always errors in the project. [img]Capture.PNG[/img]
File comment: capture
Capture.PNG [ 10.74 KiB | Viewed 13922 times ]

So I turned to change the Project Settings and made all resources link to local files, errors are still the same. These error all happened in included paths, so I put these include files under the same folder with the error file, so errors dismissed but some more came out.

I guess it is not a problem with my CCS, so maybe I need to learn more about OpenTag and I hope someone could help me with it... Thanks in advance.

PostPosted: Wed Dec 16, 2015 2:56 pm 
Site Admin

Joined: Tue Jun 12, 2012 4:33 am
Posts: 25
Location: New York, NY
The last time WizziKit was supported was 2012, and OpenTag (and WizziKit) have diverged quite a bit since then. I've stopped putting effort into the MSP430 (and CC430) because I view them as dead-end technologies. I would recommend the STM32L1 Nucleo and SPIRIT1 shield, which I'll be adding support for by end of year 2015 (I just need to get them delivered).

Display posts from previous:  Sort by  
Post Reply  Page 1 of 1 [ 2 posts ] 

It is currently Sat May 25, 2019 5:44 am

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: